Used XTOOL X100 PAD3 (X100 PAD Elite) to do key programming for Renault Duster (Dacia) 2017 via OBD, worked like a charm! Read pincode and program key (not smart key) successfully!
All devices prepared:
Car: 2017 Renault Duster (Dacia)
One original car key (working key)
One new blank key want to be programmed
Device: XTOOL X100 PAD3 Auto Key Programmer
After connecting X100 PAD3 to the vehicle via main cable, enter “Diagnosis” function
Select “Immobilization”-> “BRAZIL RENAULT”
Agree with the disclaimer
There are two main functions can be performed: Read Pincode and Program keys
Step 1: Read Pincode
Select “32 pincode”
Turn ignition off and take the original key out from the ignition
Turn Hazard lights on
Vehicle data file is found, click “YES” to use the file to get the PIN directly.
Step 2: Program keys
Select “Duster (Dacia)”-> “Without smart” -> “14- ”
Switch ignition on
Enter the 32-digit PIN automatically and confirm if it’s correct
Switch ignition off and remove the key
Insert the working key and switch ignition on
Program successfully, then go to program the new key
Remove the original key from the ignition and insert the new key, switch ignition on
Program the key successfully
Switch ignition off and wait for 5 seconds and switch ignition on
Now the number of keys in memory is 2.
Key programming is done.
Finally, use the original key and new key programmed to start the car, both work!
Awesome! X100 PAD Elite tablet key programmer add new key to 2017 Renault Duster (Dacia) successfully!
Moreover, xtool x100 pad3 also perfectly add new key to 2009 Renault Clio and Renault Duster 2010- 2013.