This post comes with a guide to use XTOOL PS90 full system diagnostic tool to initialize headlight for 2015 BMW X3 F25. It applies to all BMW car models which are supported by PS90 in Headlamp matching special function.
Something to know about Headlamp matching:
This function is used to initialize the adaptive headlight system. The adaptive headlight system determines whether to automatically turn on the headlight according to ambient light intensity, monitors driving speed and body posture, and adjusts the headlight lighting angle.
Tips & guide to initialize headlight:
When the connection between XTOOL PS90 and BMW car is normal, and then turn on PS90 tablet.
Select [Europe]-> [BMW]-> [Automatic selection]
Confirm the car info read out
Select [Service]-> [Body]-> [Lights]-> [Initialize headlight driver module]-> [Initialize new headlight driver module and teach-in turn indicator]
Initialize the TMS on the right-hand side successfully
The calibration of the LED lights in the right and left headlight will been started and taken approx in sequence.
Wait for 10 seconds for each light calibration
Then test the headlight driver module (TMS) in the following ways:
-Switch on ignition
-Switch the lights off and on
Note: A reference run must be visible. If the reference run is not visible the procedure must be performed again.
Headlight initialization is done!
Attach the related video of Headlamp matching by XTOOL PS90 Tablet for watching clearly.
For more XTOOL PS90 BMW headlight initialization car models, don’t hesitate to contact us.