Q: I have a SUZUKI Maruti (India), my all car keys lost, so I want to add a new key. Which XTOOL key programmer can do that?
A: XTOOL A80 Pro or XTOOL H6 Pro is OK.
A80 Pro= H6 Pro.
They support the same function, and the main difference is hardware configuration.
It’s easy to do key programming, just refer to the guide as below.
Connect A80 Pro/ H6 Pro to the vehicle via the main cable
Go to Asia->> MARUTI–>> immobilizer->> India–>> New BCM (smart key)
There are four functions are supported as below:
- Read Pin code
- Program key
- Program BCM
- Program ECM
Step 1: Read Pin code
Select “Read Pin code”-> “Old”
Read PIN code successfully and use your smart phone to take a picture so that you can use it easily in the next step
Step 2: Program key
Select “Program key”
“All key will to be re- program?”
Turn on the ignition switch and turn on the hazard warning light if the smart key is lost
Manually input the 8- digit PIN code read out in step 1
Hold the new key where the logo on the remote facing and touching the start/ stop button with the key
The new key is programmed successfully.
Step 3: Test the new key programmed
Use the new key to start the car and test the remote.
Available link to get XTOOL A80 Pro (Same as The H6 Pro) diagnostic tool: