2014 Mazda CX5 Add Key by XTOOL X100 Pro2
It has been confirmed that XTOOL X100 Pro2 works well in Mazda CX5 2014 key programming. Check the related test report and the newest Mazda IMMO car list.
All tools required:
XTOOL X100 Pro2 auto key programmer
2014 Mazda CX5
One original car key
One blank key
Main steps:
Select immobilizer-> Mazda V26.79-> Select by vehicle-> North America-> Mazda CX-5-> Smart key-> -2016
There are 3 functions supported:ll smart keys lost, Add a smart key and Switch ignition on
1.Switch ignition on
Follow the instruction on the screen to do.
Make sure all keys are taken out of the car
Press and hold the start button for 10 seconds, the start button lights from green to yellow
Then release and press the start button
2.Add a smart key
The min keys required is 2
Switch ignition on
Configure out the current smart key number is 2
Use a new smart key to contact start button
Automatic step on the brake pedal, manual transmission step on the clutch pedal
Configure out the current smart key number is 3
Then switch ignition off
Next, complete the following steps in order to start the engine:
-Switch ignition off
-Slam the brake pedal, the key against the start button to start the engine 3 seconds, then turn off the ignition switch
Finally, use the new key to test the remote and start the car
FYI…
The operation guide above also applies to other Mazda car models covered by X100 Pro2.
Check the specific models you desire as below before testing.
B-series 2007-
Mazda 2
-2008
2008-
2014-
Mazda 3
With smart
Without smart
Old model
New model
Mazda 5
Old model
New model
Mazda 6
With smart
Without smart
Mazda 8
With smart
Without smart
Mazda CX-3
With smart
Mazda CX-4
With smart
Mazda CX-5
With smart
Mazda CX-7
With smart
Without smart
2004-2009
2009-
Mazda CX-9 2004-2009
MX 5
2004-2009
2009-
New Mazda 6
With smart
Without smart
Mazda Axela
With smart
Mazda 6 atenza
With smart
New Mazda CX-9
With smart
Learn more car models supported by XTOOL X100 Pro2 in key programming, mileage correction or EEPROM, please go to https://www.xtool.co.uk/wholesale/xtool-x100-pro2-auto-key-programmer.html
