2013 Dodge Grand Caravan Key Fob Programming by XTOOL X100 PAD2 (Pro)
Today I’m gonna show how to program key fob for a 2013 Dodge Grand Caravan by using XTOOL X100 PAD2.
Main steps:
Step 1: Read security code
Step 2: Program new key
The procedure:
Connect X100 PAD2 to the vehicle via the main cable
Go to immobilization-> CHRYSLER
Agree with the disclaimer
Select Immobiliser/Fobik (WCM)-> Auto
Turn off the ignition switch and then turn on
It’s type 4.
Then go to read the security code and then program a new key.
Step 1: Read security code
Select “Read security code”
When the security code is read out successfully, keep it in mind, because the code for each car model is different.
Step 2: Program new key
Select “Program new key”
Then switch the ignition off, insert the new key and switch ignition on
Input the security code just read out in step 1
The new key is programmed successfully.
Finally, check if the new key can work or not.
OK, it starts the car normally.
All right! That’s the whole process that I use x100 pad2 to program a new key to my 2013 Dodge Grand Caravan. It works like a charm!
The key also can be done by XTOOL X100 PAD2 Pro. Because they support the same function, and the main difference is X100 Pad2 Pro adds VW 4th and 5th IMMO than X100 pad2 key programmer.
Have fun!
