2016 Ford EcoSport Key Fob Programming by XTOOL X100 PAD
How to program a spare key for 2016 Ford EcoSport using the XTOOL X100 Pad auto key programmer and one working key? Read the step-by-step guide in this post.
The main operation guide:
1.Read security code
2.Switch the ignition OFF and wait for 10 seconds. Then switch the ignition ON, press OK
3.Read code success
4.Communicating
5.Press UNLOCK button of the smart key to add for 1 sec within 15 sec, press OK to continue
6.Program complete
The detailed steps:
Connect X100 PAD to the vehicle via main cable
Enter Diagnosis function
Select Immobilization-> Ford-> China Ford-> Smart key system-> EcoSport-> -2019-> Add a smart key
Confirm whether there is an emergency slot smart key
Switch the ignition OFF and wait for 10 seconds. Then switch the ignition ON, press OK on the screen
Read successfully
Press UNLOCK button of the smart key to add for 1 sec within 15 sec, press OK to continue
Insert the smart key into the card slot
Remove the smart key from the slot
The key programming is done.
Finally, use the smart key programmed to start the car, work normally.
FYI…
XTOOL X100 PAD key programmer also add a new key to 2008 Ford Focus successfully.
Reference: 2008 Ford Focus Add a New Key by XTOOL X100 PAD
