XTOOL PS90 Reset EPB for BMW+ Car List
XTOOL PS90 is a comprehensive full system diagnostic tool featuring key programming, mileage adjustment, and 12 special functions such as EPB, DPF, ABS, TPMS, etc for European, American, Australian and Asian cars. This post will mainly introduce the EPB reset function for BMW.
Let’s start with the XTOOL PS90 BMW EPB Reset Full Car List.
| Carmaker | Series | Model |
| BMW | 1 series | E81/E82/E87/E88 |
| BMW | 1 series | F20/F21 |
| BMW | 2 series | F22/F23 |
| BMW | 2 series | F45 |
| BMW | 3 series | E90/E91/E92/E93 |
| BMW | 3 series | F80 |
| BMW | 3 series | F30/F31/F34/F35 |
| BMW | 4 series | F32/F33/F36 |
| BMW | 4 series | F82/F83 |
| BMW | 5 series | E60/E61 |
| BMW | 5 series | F07 |
| BMW | 5 series | F10/F11 |
| BMW | 5 series | F18 |
| BMW | 5 series | GT(F07) |
| BMW | 6 series | E63/E64 |
| BMW | 6 series | F06/F12/F13 |
| BMW | 7 series | E65/E66/E68 |
| BMW | 7 series | F01/F02/F03/F04 |
| BMW | I series | I_101/112 |
| BMW | X series | X1_E84 |
| BMW | X series | X5_E70 |
| BMW | X series | X6_E71/E72 |
| BMW | X series | X3_F25 |
| BMW | X series | X4_F26 |
| BMW | X series | X5_F15/F85 |
| BMW | X series | X6_F16/F86 |
| BMW | Z4 Series | E89 |
So, how to reset EPB for BMW using XTOOL PS90 diagnostic tool?
e.g 2015 BMW X3 F25
Step 1: Connect PS90 tablet with the BMW car via Bluetooth
Step 2: Select “Electric Parking Brake”-> “BMW”-> “X Series”-> “X3_F25”-> “Replace the rear brake pads”-> “Retract brake wheel cylinder mode”
Step 3: Follow the on-screen prompts to operate
1.Pull the parking brake button and wait about 3 seconds, press [OK] to continue
2.Push the brake pedal and press the parking brake button for 3 seconds, press[OK] to continue
3.Next whether to release the two wheel cylinders of checking the parking brakes, press [OK] to continue
4.Parking brake released! Next operation will make the parking brake in the position of replacing the brake pads, need about 5 seconds, press [OK] to continue
5.The brake wheel cylinder has retracted to the position of installation. Switch ignition and wait at least 30 seconds. Press [OK] to continue
6.The brake wheel cylinder has retracted, replace rear brake pads! After replacing and putting the brake wheel cylinder back, press [CANCEL] to back to the menu of release brake wheel cylinder mode.
Step 4: Select “Release brake wheel cylinder mode” and follow the prompt to do step by step
1.Switch ignition on, press [OK] to continue
2.The brake wheel cylinder is going to release and reset, press [OK] to continue
3.Push the brake pedal and press the parking brake button for 3 seconds, press[OK] to continue
4.Pull the parking brake button for about 3 seconds, till the parking brake started, press [OK] to continue
5.Push the brake pedal and press the parking brake button for 3 seconds, press[OK] to continue
Now the parking brake has released.
Please kindly notice:
- After renewing the rear brake caliper actuator or brake pad, only repeatedly control parking brake can operate correctly.
- Check whether there is DTC or not “C0805E9-Garage mode activated”, if there is, clear DTC.
Press [Cancel] to back.
More details of XTOOL PS90 diagnostic scan tool: https://www.xtool.co.uk/wholesale/xtool-ps90-tablet-diagnostictool-support-tps-oil-resetting-epb-tpms-airbag.html
