XTOOL VAG Token for VAG 4th 5th IMMO & MQB AKL Using Tips

This post comes with the guide to get and use XTOOL VAG Token (Point Code) to works with XTOOL key programmer for VAG 4th 5th IMMO & MQB AKL.

 

Why do you need Xtool VAG Token?

XTOOL VAG Point Code can be used with XTOOL X100 PAD2, X100 PAD2 PRO / X100 PAD3 to get the authorization for calculation access via OBD2 for VAG 4th & 5th immobilizer systems and MQB-platform, for all keys lost (AKL) key programming (e.g Golf 7 2013). NO EEPROM REQUIRED!

 

During this process, you should connect internet so that XTOOL Pad can connect to VAG servers and perform calculation. After the calculation is done, your tablet will have unlimited access to that same vehicle.

 

How to get Xtool VAG Token?

It’s only for 7.8 pounds at xtool.co.uk. Just order it and then contact us to get one code. Online sending! No need shipping!

After ordered, you will receive an email with your activation code. Keep this email because you need to enter the code for programming.

 

How to use Xtool VAG Token?

Step 1: Select “the vehicle system”:

Different vehicle system interfaces are shown as below:

VW 4th Immobilizer System

Xtool Vag Token Using Tips 1

Audi 5th Immobilizer System

Xtool Vag Token Using Tips 2 Xtool Vag Token Using Tips 3

Audi MQB Platform

Xtool Vag Token Using Tips 4

Step 2: Select “Online mode”

Xtool Vag Token Using Tips 5

Step 3: Then you will receive an order information “This password needs to be paid to get it, please contact your local dealer or Xtool”.

Please enter your activation code at this time.

Xtool Vag Token Using Tips 6

Step 4: Once you input the valid code, it starts getting “Calculation Request Number…”. It will take 30 seconds to 3 minutes in whole process, please be patient!

Xtool Vag Token Using Tips 7

Step 5: When the calculation process is done, you will get a message “Get data successfully!”

Xtool Vag Token Using Tips 8

Please kindly notice:

If your internet was interrupted during the online calculation, you will receive an error report “Error code: E40303 Failed to get valid immobilizer information, please connect the dealer or after-sales department”.

Xtool Vag Token Using Tips 9

Don’t worry about this problem, your VAG Point Code is still available to use if the calculation fails. Just try to start the calculation using the same code again.

Step 6: Finally, you can add a key or do all keys lost for VAG 4th / 5th IMMO & MQB Immobilizer system.

 

Available link to get XTOOL MQB Online Programming Token: https://www.xtool.co.uk/wholesale/xtool-online-mqb-code.html