This post comes with the test report about change mileage on new SUZUKI Swift 2017-2020 using XTOOL X100 PAD3.
Firstly, check the SUZUKI vehicles supported by X100 PAD3 as below.
|SUZUKI||Grand Vitara||Type 1 D70F3421|
|SUZUKI||Grand Vitara||Type 2 D70F3422|
Next, see the test report on SUZUKI Swift 2017-2020.
The original mileage of Swift is 72000km
Make sure the connection between XTOOL X100 PAD Elite and the vehicle is normal, then go to operate on a tablet.
Select “Immobilization”-> “Diagnosis for INSUZUKI”-> “India”-> “ICM”-> “Swift 2017- ”
Turn on the ignition on
Then select “Mileage adjustment”
When it read out EEPROM data, go to save it with an available name.
Detect out the current mileage is 72000km, then input a new mileage and confirm if it is correct
Now the odometer has been reset successfully and appears on the dashboard at the same time.
Last but not least, please pay attention to the following important notice.
Though XTOOL X100 PAD3 (X100 PAD Elite) auto key programmer supports odometer adjustment for SUZUKI, VW/ AUDI/ SEAT/SKODA, BUICK, CADILLAC, CHEVROLET, CHRYSLER, FORD, MAZDA, NISSAN, KIA, HYUNDAI, JAGUAR, LAND ROVER, PORSCHE and more…
Not sure every car model can be supported. Before purchasing, you’d better offer the specific car model you own to our customer service online to check if it can be supported.