Xtool X100 Pad2 Pro Add New Key to Audi A6 ID8E in 3 Steps
How to add an ignition key to Audi A6 ID8E by XTOOL X100 PAD2 Pro auto key programmer with the original key? Check the step-by-step guide as below.
Main steps:
Step 1: Get PIN/CS
Step 2: Make dealer key
Step 3: Learn keys
The operation procedure:
Connect X100 PAD2 Pro key programmer to Audi A6 ID8E car via the main cable directly, and connect to KC100 adapter via USB cable
Select Immobilization-> Audi-> 4th/5th immobilizer system
Turn the ignition switch on
Select 4th immobilizer system-> Q7 A6L_C6 (Recommend)-> Chip Type 9S12DT256 (after 2009)
There are 5 options can be performed depending on the specific situation as below:
- Backup EEPROM data
- Get PIN/CS
- Make dealer key
- Learn keys
- Unlock key
Step 1: Get PIN/CS
Read out immobilizer data
Step 2: Make dealer key
Put the new key that ready to add into the coil of XTOOL KC100
Make dealer key successfully
Step 3: Learn keys
Input the key number want to learn manually
Turn off the ignition, pull out the key, then insert all keys that need to be programmed into the ignition, then twist to the right and wait for about 3 seconds, the meter will automatically light up
After the key has been learned successfully, test all keys to check if they can start the car and do remote normally.
Done!
FYI…
Besides Audi A6 ID8E, other Audi car models also can work well with X100 PAD2 (Pro).
Check the real feedback as below.
Audi A4 2007 add remote- OK
Audi A1 2016 Change mileage, Learn key, Works good
Audi a4 2012 (eu cars) read, make dealer key and program key all ok, Remote key not proximity
Audi TT 2001 read pin, add key and remote all ok
2007 Audi A4 2.0 TDi add remote 2 mins very good shows what slots are programmed and lets you pick slot 1-4 for new remote.
Audi Q7 2008 mileage correction – OK, done the job under menu 2009-2011 – waiting time around 20 minutes, must be patient
2010 Audi A3 program remote function very fast with no issues
A4 2010 add key ok
…
For your convenience, here is the XTOOL X100 PAD2/X100 PAD2 Pro car list for Audi Immobilization.
Note: it also applies to VW, SKODA, BENTLEY and SEAT.
| System type | Include car models | Function |
| Diagnostic function | AUDI, SKODA, VW, BENTLEY, SEAT | 01 Engine 09 Central control 17 Dashboard 25 Immobiliser 35 Central lock 46 Central comfort module 02 Automatic transmission 03 Anti-lock brakes 08 Automatic air conditioning 15 Airbag 16 Steering wheel 19 Gateway can 44 Power Steering 53 Parking Brake 55 Xenon lamp 56 Radio 76 Parking Aid |
| Read security code | AUDI | 17 Dashboard 25 Immobiliser Jetta (2010-) GTI |
| SKODA, VW, BENTLEY, SEAT | 1.01 Engine 1.1.SantanaVista 1.2.Lavida 1.3.Touareg 1.4.Beetle 1.4.1.-2006 1.4.2.2007- 1.5.Other |
|
| Program keys | AUDI, SKODA, VW, BENTLEY, SEAT | 17 Dashboard 25 Immobiliser Jetta (2010-) GTI |
| Program remote | AUDI, SKODA, VW, BENTLEY, SEAT | 09 Central control (CANBUS) 09 Central control (UDS) 35 Central lock (KWP1281)TYPE 1 35 Central lock (KWP1281)TYPE 2 46 Central comfort module (KWP1281)TYPE 1 |
| ECU Synchronization | AUDI, SKODA, VW, BENTLEY, SEAT | 1.Imm2 1.1.Replace the engine ECU 1.2.Replace the immobilizer ECU 1.Imm3 1.1.Replace the engine ECU 1.2.Replace the Dashboard 1.Imm3.5 1.1.Replace the engine ECU 1.2.Replace the immobilizer ECU |
| 4th/5th Immobilizer system |
4th Immobilizer system | 1.CDC+24C32 2.NEC+24C32 3.9S12XHZ51(Golf6 MM7-2011) 4.NEC+95320 5.NEC+95320 (HohnSon/JCI) 6.NEC 35XX 7.NEC+24C64 8.NEC+C64 Color screen 9.NEC+24C64 (2013) Blank screen 10.NEC+24C64 (2013) Color screen 11.NEC+24C64 (2015-) 12.A1/Q3NEC+24C64 (-2014) 13.Magotan/CC 14.A6L/Q7 15.AUDI A4R8 (2005-) 16.AUDI A4R4 (-2004) 17.AUDI A3/TT/R8 |
| 5th Immobilizer system | 1.Match the key 2.Online mode 3.A6/A7/A8 All-lost Online |
|
| A8/Phaeton/Touareg/Bentley(46 chip) | 1.upload data 2.Download data 3.Generate dealer key 4.Learning key 5.Read PIN code and CS code (OBD) 6.Get the seventh byte of CS code |
|
| 4th immo 96-bit key (copy/learn) |
1.upload data 2.Download data 3.Generate dealer key 4.Learning key 5.Learning Key (UDS) 6.Unlock key 7.Online mode |
|
| MQB platform | 1.Read anti-theft data 2.Generate dealer key 3.Learning key 4.Reset meter |
|
| MQB platform(Online | 1.upload data 2.Download data 3.Generate dealer key 4.Learning key 5.Online mode |
|
| A6L/Q7(Online) | 1.upload data 2.Download data 3.Generate dealer key 4.Learning key 5.unlock key |
If you have any problem about the car model supported by XTOOL key programmer or others, please feel free to contact us.
Contact info:
Email: Sales@XTOOL.co.uk
whatsapp: +86 18223445829
