How to Use KC100 with X100 PAD3 for 4th and 5th immobilizer to copy new keys

by Posted on

KC100 works with VW/Audi/Skoda/Seat 4th and 5th immobilizer software and BMW CAS1-3 and BMW CAS4 immobilizer software. Lets take VW as an example. Since VW 4th and 5th Immo programming needs online programming, please make sure X100 PAD3 connect Internet before doing programming.

Please find operation steps as below:

1. Please use main cable and OBDII connector (or other relative connector) to connect between X100PAD3 and your car’s OBD port.
2. Please use USB to mini USB cable to connect between X100PAD3 and KC100.


3. Please switch ignition on position, then enter software as following steps:
Immobilization – VW – 4th/5th Immobilizer System

4.If your car is 4th immobilizer system, please click 4th immobilizer system. If your car is 5th immobilizer system, please click 5th immobilizer system. It will detect your meter type automatically, if it does not detect successfully, you can choose your meter type manually.

5.Then follow the instructions that software reminds you to copy new keys.

Related posts:

  1. Xtool X100 Pad2 add VW Jetta key 4th immo with KC100
  2. Xtool X100 PAD3 program BMW CAS4+ new key via OBD
  3. Xtool KC501 + X100 PAD3 Read Remote Frequency Guide
  4. OBD program Toyota Lexus smart keys lost via Xtool X100 PAD3 & KS-1 emulator

Published by admin