2015 Vauxhall Movano Spare Key Added by XTOOL X100 PAD2 (Pro)

Today we’re going to be showing the process of programming a spare key on a 2015 Vauxhall Movano with the working key. The key programmer we will use is XTOOL X100 PAD2 (X100 PAD2 Pro is also OK). No need to read the Pin code!

X100 Pad2 Pro Program 2015 Vauxhall Movano 1

Now let’s start it!

 

The Xtool key programmer we will use is EU version, but the operation guide is the same as global version.

 

Because this vehicle is based on Renault platform, it’s based on a Renault master.

So after connecting x100 pad2 to the vehicle properly, then go to immobilization function and select “RENAULT EU” to do.

X100 Pad2 Pro Program 2015 Vauxhall Movano 2

Agree with the disclaimer

The ignition of the vehicle is off and doors are closed.

Select “Program keys”

X100 Pad2 Pro Program 2015 Vauxhall Movano 3

Note: A lot of Renaults can be supported by x100 pad2 key programmer, so you don’t need to read the pin code. It can automatically do it as part of the process.

Then select “Master”-> “10-16”

X100 Pad2 Pro Program 2015 Vauxhall Movano 4

Use the original working key to turn the ignition switch on

X100 Pad2 Pro Program 2015 Vauxhall Movano 5

Select “Program keys”

Switch ignition off and remove the original key

The Pin Code has been got automatically.

X100 Pad2 Pro Program 2015 Vauxhall Movano 6

Insert the original key back in and turn ignition on.

Note: It’s very important to have all of the keys present because most of the time in this sort of a system, it will erase any keys which aren’t present.

Check if the security led off

There are no immobilizer warning lights on the dashboard, so just click “Yes” to continue.

X100 Pad2 Pro Program 2015 Vauxhall Movano 7 X100 Pad2 Pro Program 2015 Vauxhall Movano 8

It says “Whether to program next key?” Press “Yes” to continue

X100 Pad2 Pro Program 2015 Vauxhall Movano 9

Take the old key out and insert the new key to turn the ignition on and wait for 10 seconds

Check if the security led off again

There’s also no immobilizer warning light on the dashboard, so just click “Yes” to continue.

No need to program next key, then wait for 15 seconds

The programming is done.

X100 Pad2 Pro Program 2015 Vauxhall Movano 10

Finally, take the key programmed out to test the central locking, it works fine, and all the buttons are functioning absolutely fine. The original key is still working.

They both can start the car normally, and there is no warning light appearing.

 

All right! Xtool X100 Pad2/X100 PAD2 Pro program a new key to 2015 Vauxhall Movano successfully.

 

www.xtool.co.uk