XTOOL A80 Pro Using Tips: Battery+ Mainboard+ Screen Replacement
In the last post, I have introduced the XTOOL A80 Pro User Manual incl. function, car list, etc. Today you will learn some using tips about how to replace battery, mainboard and screen by yourself.
Something important to know:
This replacement guide is only for professional users. It may cause server damages to the device without the guidance of professionals.
1.How to replace battery?
Step 1: Turn off the XTOOL A80 Pro tablet and make sure the tablet is power off
Step 2: Use screwdriver to loosen the screws (No.1~No.10) in the figure as below to remove the tablet case
Note: there is a cable connected between the mainboard and right handle. Please be careful to remove the handle.
Step 3: Loosen the screws (No.1~No.6)
Disconnect the battery cables connector (No.7) and take out battery
Step 4: Install the new battery replacement
Connect cable connector and tighten the screws to fix battery
Step 5: Install tablet case
Tighten the screws (No.1~No.10) to fix it
Step 6: Press the power button to turn on the A80 Pro tablet
Check whether the tablet works normally
2.How to replace mainboard?
The step 1/2/3 are same as battery replacement operation
Step 4: Loosen the screws (No.1~No.8)
Disconnect the cables connector (No.9~No.14)
Step 5: Remove the handle and failed mainboard
Install the new mainboard replacement
Step 6: Tighten the screws to fix mainboard and battery
Connect all of the cables and assemble the handle
Step 7: Install tablet case
Tighten the screws (No.1~No.10) to fix it
Step 8: Press the power button to turn on the tablet
Check whether the tablet works normally
Note: the step 7& step 8 are same as step 5 & step 6 in battery replacement.
3.How to replace screen?
Operate the step 1/2/3 as same as A80 Pro battery replacement
Step 4: Loosen the screws (No.1~No.8)
Disconnect the mainboard cables connector (No.9~No.14)
Remove the handle and mainboard
Step 5: Loosen the screws (No.1~No.8)
Remove the screen support
Step 6: Take out the failed screen
Install the new screen replacement
Step 7: Install the screen support
Tighten the screw to fix it
Step 8: Install the mainboard
Tighten the screw to fix it
Connect all cables
Step 9: Install battery
Tighten the screw to fix it
Connect all cables
Step 10: Install tablet case
Tighten the screws (No.1~No.10) to fix it
Step 11: Press the power button to turn on the tablet
Check whether the tablet works well
Note: just check the corresponding pictures same as battery replacement
If you have any other problem with XTOOL A80 Pro all system diagnosis ECU programmer, please feel free to contact us.
More info: How to use Xtool A80 Pro
