XTOOL X100 PAD2 Pro VW IMMOBILISER Car List+ Add New Key in 4 Steps
XTOOL X100 PAD2 Pro with KC100 can perform key programming for VW, SKODA, VW, BENTLEY, SEAT (especially adds 4th & 5th IMMO). In this post, you will learn the newest Immobilizer car list for VW and how to add new key to VW by pin code in 4 main steps.
Firstly comes with the X100 PAD2 Pro VW Immobilizer car list:
Note: this car list applies to AUDI, SKODA, VW, BENTLEY and SEAT.
| System type | Include car models | Function |
| Diagnostic function | AUDI, SKODA, VW, BENTLEY, SEAT | 01 Engine 09 Central control 17 Dashboard 25 Immobiliser 35 Central lock 46 Central comfort module 02 Automatic transmission 03 Anti-lock brakes 08 Automatic air conditioning 15 Airbag 16 Steering wheel 19 Gateway can 44 Power Steering 53 Parking Brake 55 Xenon lamp 56 Radio 76 Parking Aid |
| Read security code | AUDI | 17 Dashboard 25 Immobiliser Jetta (2010-) GTI |
| SKODA, VW, BENTLEY, SEAT | 1.01 Engine 1.1.SantanaVista 1.2.Lavida 1.3.Touareg 1.4.Beetle 1.4.1.-2006 1.4.2.2007- 1.5.Other |
|
| Program keys | AUDI, SKODA, VW, BENTLEY, SEAT | 17 Dashboard 25 Immobiliser Jetta (2010-) GTI |
| Program remote | AUDI, SKODA, VW, BENTLEY, SEAT | 09 Central control (CANBUS) 09 Central control (UDS) 35 Central lock (KWP1281)TYPE 1 35 Central lock (KWP1281)TYPE 2 46 Central comfort module (KWP1281)TYPE 1 |
| ECU Synchronization | AUDI, SKODA, VW, BENTLEY, SEAT | 1.Imm2 1.1.Replace the engine ECU 1.2.Replace the immobilizer ECU 1.Imm3 1.1.Replace the engine ECU 1.2.Replace the Dashboard 1.Imm3.5 1.1.Replace the engine ECU 1.2.Replace the immobilizer ECU |
| 4th/5th Immobilizer system |
4th Immobilizer system | 1.CDC+24C32 2.NEC+24C32 3.9S12XHZ51(Golf6 MM7-2011) 4.NEC+95320 5.NEC+95320 (HohnSon/JCI) 6.NEC 35XX 7.NEC+24C64 8.NEC+C64 Color screen 9.NEC+24C64 (2013) Blank screen 10.NEC+24C64 (2013) Color screen 11.NEC+24C64 (2015-) 12.A1/Q3NEC+24C64 (-2014) 13.Magotan/CC 14.A6L/Q7 15.AUDI A4R8 (2005-) 16.AUDI A4R4 (-2004) 17.AUDI A3/TT/R8 |
| 5th Immobilizer system | 1.Match the key 2.Online mode 3.A6/A7/A8 All-lost Online |
|
| A8/Phaeton/Touareg/Bentley(46 chip) | 1.upload data 2.Download data 3.Generate dealer key 4.Learning key 5.Read PIN code and CS code (OBD) 6.Get the seventh byte of CS code |
|
| 4th immo 96-bit key (copy/learn) |
1.upload data 2.Download data 3.Generate dealer key 4.Learning key 5.Learning Key (UDS) 6.Unlock key 7.Online mode |
|
| MQB platform | 1.Read anti-theft data 2.Generate dealer key 3.Learning key 4.Reset meter |
|
| MQB platform(Online | 1.upload data 2.Download data 3.Generate dealer key 4.Learning key 5.Online mode |
|
| A6L/Q7(Online) | 1.upload data 2.Download data 3.Generate dealer key 4.Learning key 5.unlock key |
Next, let’s see how to add new key to VW cars by X100 PAD2 Pro key programmer.
e.g 2014 VW CC
Preparation:
Xtool X-100 PAD2 Pro full Configuration
VW CC 2014 control module EEPROM chip
One original car key (test the remote and start the car normally)
One blank key (cannot work)
Main 4 steps to program key:
Step 1: Get pin code
Step 2: Generate 48 dealer key
Step 3: Match new key
Step 4: Program remote
Step 1: Get pin code
Connect X100 PAD2 PRO with KC100 to the vehicle
Insert the original key into ignition
Press “X100 PAD2” on the tablet-> select Immobilization-> VW-> 4th& 5th Immobilizer system
Turn on ignition switch
Select 4th immobilizer system-> VW Passat/CC (Recommend) -> Get PIN/CS
Follow the prompt to select EEPROM data
Codes will be extracted from EEPROM chip dump file
Step 2: Generate 48 dealer key
Select “Generate 48 dealers key” to activate KC100 adapter-> enter CS code-> Put the blank key to coil-> Generate 48 dealer key successfully
Step 3: Match new key
Select “Match the key”->Enter Pin code and learning key number
Enter the learning mode after confirm immo, use each matched key to turn on ignition switch
Match new key succeed
At this time, the original key and new key both can start the car, but the new key cannot remote.
Step 4: Program remote
Select “Program remote”-> Turn on ignition switch-> Select “46 Central comfort module (CANBUS)” -> “Erase remote”
Erase remote success
Then select “Program remote”-> Press any key of the remote to add once program completed
Finally, test the key programmed can work normally or not.
More original XTOOL key programmers can be purchased at https://www.xtool.co.uk/
